Cold Incubator

The smart incubator model CIF400E, is a triple-walled Refrigerated incubator with highly accurate temperature control. The controller of this device is designed in a way that immediately makes any temperature differences disappear. Utilizing the unique technologies of NON CUT and HCT has led to 0.1 degree accuracy, even in the cooling mode. The round corners of the inner chamber have given the device such beauty and elegance and greatly help the user in cleaning it.

The circulation fan with air channel is one of the innovations in production of this device that led to a perfect isotherm. This device is used in medical, industrial and research laboratories.

  • Volume400 liters
  • Circulation fan

Model selection guide

Select according to product specifications

  • The heater element is embedded in protection stainless steel shield
  • Inner chamber and Heater element container made of stainless steel
  • External Case Coated with electrostatic powder paint
  • Circulation fan system with air channel
  • Equipped with Error Alarm
  • Chrome - plated racks for better uniformity
  • 4 casters ( 2 front casters with brake)
  • Triple-walled
  • Inner glass door

Microprocessor controller

  • Outage detection in time of operation and subsequent notification of the operator
  • 999-hours smart timer (permanently operable)
  • PID controller with an accuracy of 0.1 degree
  • Adjustable thermal and cooling ramp.
  • PT 100 temperature sensor
  • Central troubleshooting system
  • Delay timer

Utilizing the unique technology of HCT (Homogenize Chamber Technology)

  • Short warm up times
  • Uniform circulation even under full load
  • Temperature stability and reproducibility
  • High heating and cooling rate
  • Triple-walled

Cooling system with the unique technology of NON CUT

  • Operable in environmental conditions with high temperatures (up to 32°C)
  • Temperature fluctuations of 1°C, even in the cooling mode
  • 40% saving in energy consumption
  • Operable at down to -5°C
  • Frost-free

Outer body

  • Specially designed wire passing channel through the hinges to prevent damage to the controller interface wires
  • Very tight door closure with 2-pointdoor latch.
  • Independent, adjustable safety thermostat with visual temperature alarm
  • Beautiful and ergonomic design

Inner chamber

  • Easy loading and unloading of specimen material
  • Circulation fan with air channel for the uniformity of the inner chamber, even under full load.
  • Fully stainless steel.
  • Rack with tilt protection.
  • Easy cleaning.
  • Silicon tape around the door instead of magnet ones
  • Easy access to the element and evaprator container for cleaning
  • Low heat dissipation due to 60 mm insulation.

Services and golden warranty

  • 10-years after sales service
  • 5-yearscompressor warranty
  • 5-years element warranty
  • 1-year replacement warranty
  • 2-years warranty

Exterior dimensions CIF400E
Plus door handle and connection (cm) 80
wall clearance, rear (cm) 10
Wall clearance, side (cm) 16
Height (incl. feet) (cm) 194.5
Number of doors (ea.) 1
Weight (empty) (kg) 220
Width (cm) 93
Depth (cm) 73
Interior dimensions CIF400E
Racks (number standard/max.) 2-(14)
Permitted total load (kg) 45
Load per rack (kg) 5
Interior volume (l) 401
Width (mm) 65
Height (mm) 130
Depth (mm) 47.5
Temperature data CIF400E
Temperature variations at 25 °C ±0.2
Temperature range (°C) -5 to 70
Display accuracy @+5 °C ±0.5
Display accuracy @25 °C ±0.1
Display accuracy @37 °C ±0.1
Uniformity CIF400E
@+5 °C(±k) ±0.8
@25 °C(±k) ±0.2
@37 °C(±k) ±0.2
heating-up time (*) CIF400E
heating -up time to 0 °C (min) 90
heating -up time to 25 °C (min) 60
heating -up time to 37 °C (min) 60
Recovery time after doors were open for 30 sec (*) CIF400E
@ 0 °C (min) 20
@ 25 °C (min) 5
@ 37 °C (min) 3
Electrical info CIF400E
Frequency (HZ) 50
Voltage(V AC) 220
Current (A) 13.6
Power (W) 3000

(* )To 98% of the set value

All technical data are specified for units with standard equipment at an ambient temperature of 25 °C and a line voltage fluctuation of ±10%


  • Perforated shelf made of stainless steel sheet
  • Producible based on custom sizes and temperatures
  • Installation of a 220V outlet in the chamber
  • Metal-framed glass doors
  • Calibration certificate
  • Light bulb










Some of our clients